Vehicle detection sensor for barriers and gates
ProAccess van BBC Bircher Smart Access
ProAccess is a vehicle detection sensor for barriers and gates from BBC Bircher Smart Access. The vehicle detection sensor provides the solution where loop detectors cannot be applied. The detection sensor is mounted half a meter above the ground and is therefore easy to install and accessible for maintenance. The sensor has a range of 5,5 meters and is equipped with built-in heating in an IP65 sealing case. This makes the vehicle detection sensor suitable for use in cold and wet environments, both outdoors and indoors.
Detection of vehicles and pedestrians
The ProAccess uses radar and ultrasonic technology to detect movement. The detection sensor distinguishes in the detection of vehicles and individuals to prevent manipulation of the entrance gate. ProAccess can quickly activate barriers, parking machines, gates or traffic poles as a vehicle approaches. By combining multiple detection sensors, you can prevent vehicles from being damaged by, for example, closing a barrier early.
View ProAccess vehicle detection sensor in the webshop Ask your question
ProAccess vehicle detection features
-
Quick and easy to install thanks to an above-ground assembly
-
With built-in heating and IP65 seal optimally suited for outdoor use
-
User-friendly menu and feedback via LED
-
Sensitivity and detection angle (± 30°) can be adjusted for accurate detection
-
Mounting bracket
-
Reliable detection, even at speeds of up to 20 km/h (12 mph)
-
Object differentiation can filter out pedestrian traffic
-
High electromagnetic compatibility (EMC) prevents unwanted interference with other components
-
Different modes for activation and vehicle protection
-
Material-independent detection of vehicles
-
Ability to teach stationary objects
Wide detection by mounting brackets
For safe and flawless vehicle access, the ProAccess vehicle detection sensor is ideal to combine with safety switch strip and the RFGate 3 for wireless signal transmission. The detection angle of one detection sensor is ± 30°. By using a mounting bracket, you are able to create a detection angle of 45° to 90°.
Application |
Application |
Application |
Solution |
Solution
|
Solution
|
Benefits | Benefits | Benefits |
► Distinction between vehicle detection and pedestrians: Pedestrians are filtered out to prevent manipulation ► No digging or grinding work thanks to the above-ground assembly ► Full integration for high vandalism protection |
► Wiring and cables only on one side of the entrance gate, instead of both sides. ► Reliable vehicle presence detection ► Closing edge protection |
► No digging or grinding work thanks to the above-ground assembly |